background image

7. 

Specifications

      

7.1 Wireless Specifications

Line of sight wireless transmission (in open air): 300 feet, 100 feet  under 

most conditions.

Frequency: 433 MHz

Update Rate: 60 seconds

  

7.2 Measurement Specifications

      The following table provides specifications for the measured parameters. 

   7.3 Power Consumption

Base  station  (display  console):  4  x AAA  1.5V Alkaline  or  Lithium  batteries 

(not included)

Remote sensor : 2 x AAA 1.5V Alkaline or Lithium batteries (not included)

Battery life:  Minimum 12 months for base station with one sensor and 

excellent reception. Intermittent reception and multiple sensors may 
reduce the battery life.

  Minimum  12  months  for  thermometer-hygrometer  sensor  (use  lithium 

batteries in cold weather climates less than -4°F)

8. Troubleshooting Guide

     If your question is not answered here, you can contact us as follows:

6. Glossary of Terms

 

 

 

 

 

 

 

 

  

 

Version 1.0

        

©Copyright 2013, Ambient  LLC.        All Rights Reserved.

                        

Page 12

   

Term                                Definition

    

Accuracy is defined as the ability of a measurement to match 
the actual value of the quantity being measured.

Range is defined as the amount or extent a value can be 
measured.

Range

Accuracy

A hygrometer is a device that measures relative humidity.  
Relative humidity is a term used to describe the amount or 
percentage of water vapor that exists in air.

Hygrometer

Measurement

Range

Resolution

Indoor Temperature

32 to 140°F

± 1°F

0.1°F

Outdoor Temperature

-40 to 140°F

± 1°F

0.1°F

Accuracy

10 to 99 %

10 to 99 %

± 5% (only guaranteed 
between 20 to 90%)

± 5% (only guaranteed 
between 20 to 90%)

1%

1%

Indoor Humidity

Outdoor Humidity

Summary of Contents for WS-08

















Reviews: