Problem
Solution
Indoor and Outdoor
Temperature do not
agree
Allow up to one hour for the sensors to stabilize due to signal
filtering. The indoor and outdoor temperature sensors should
agree within 2 °F (the sensor accuracy is ± 1 °F).
Use the calibration feature to match the indoor and outdoor
temperature to a known source.
Indoor and Outdoor
Humidity do not
agree.
Allow up to one hour for the sensors to stabilize due to signal
filtering. The indoor and outdoor humidity sensors should
agree within 10 % (the sensor accuracy is ± 5 %).
Use the calibration feature to match the indoor and outdoor
humidity to a known source.
Display console
contrast is weak
Replace console batteries with a fresh set of batteries.
Version 1.0
©Copyright 2013, Ambient LLC. All Rights Reserved.
Page 14
9
.
Accessories
The following software and hardware accessories are available for this
weather station at
.
www.AmbientWeather.com
Accessory
Description
AAA lithium batteries for cold weather climates.
Energizer AAAS Lithium
Battery (2-pack) - Batteries for
Long Life and Cold Climates
Solar Radiation Shield improves temperature
accuracy for hot weather climates. Remove the rain
guard and install over thermo-hygrometer.
Ambient Weather
SRS100LX Temperature and
Humidity Solar Radiation
Shield
One step calibration kits for digital hygrometers use
salt slurry formula to accurately calibrate the indoor
and outdoor hygrometers.
Ambient Weather Humidity
Calibration Kits
Add additional remote thermo-hygrometers. Supports
up to eight remote sensors.
Ambient Weather F007TH
Wireless Thermo-Hygrometer
for WS-08 Weather Stations
Add as many display consoles as you like to your
existing system to display the remote sensor in
different locations.
Ambient Weather WS-08-C
WS-08 Big Digit 8-Channel
Wireless Thermo-
Hygrometer, Console Only
