background image

However,  there  is  no  guarantee  that  interference  will  not  occur  in  a  particular 
installation.  If  this  equipment  does  cause  harmful  interference  to  radio  or 
television reception, which can be determined by turning the equipment off and 
on,  the  user  is  encouraged  to  try  to  correct  the  interference  by  one  or  more  of 
the following measures: 

Reorient or relocate the receiving antenna. 
Increase the separation between the equipment and receiver. 
Connect the equipment into an outlet on a circuit different from that 

to which the receiver is connected. 

Consult the dealer or an experienced radio/TV technician for help. 

12.  Warranty Information

Ambient,  LLC  provides  a  1-year  limited  warranty  on  this  product  against 
manufacturing defects in materials and workmanship.

This  limited  warranty  begins  on  the  original  date  of  purchase,  is  valid  only  on 
products purchased and only to the original purchaser of this product. To receive 
warranty  service,  the  purchaser  must  contact  Ambient,  LLC  for  problem 
determination and service procedures. 
Warranty service can only be performed by a Ambient, LLC. The original dated bill 
of sale must be presented upon request as proof of purchase to Ambient, LLC.

Your Ambient,  LLC  warranty  covers  all  defects  in  material  and  workmanship  with 
the following specified exceptions: (1) damage caused by accident, unreasonable 
use  or  neglect  (lack  of  reasonable  and  necessary  maintenance);  (2)  damage 
resulting  from  failure  to  follow  instructions  contained  in  your  owner's  manual;  (3) 
damage resulting from the performance of repairs or alterations by someone other 
than an authorized Ambient, LLC authorized service center; (4) units used for other 
than home use (5) applications and uses that this product was not intended (6) the 
products  inability  to  receive  a  signal  due  to  any  source  of  interference  or  metal 
obstructions and (7) extreme acts of nature, such as lightning strikes or floods. 

This  warranty  covers  only  actual  defects  within  the  product  itself,  and  does  not 
cover the cost of installation or removal from a fixed installation, normal set-up or 
adjustments,  claims  based  on  misrepresentation  by  the  seller  or  performance 
variations resulting from installation-related circumstances.

●  
●  
●  

●  

 

Version 1.0

        

©Copyright 2013, Ambient  LLC.        All Rights Reserved.

                        

Page 16

Summary of Contents for WS-08

















Reviews: