Version 1.0
©Copyright 2013, Ambient LLC. All Rights Reserved.
Page 2
1
Introduction
Thank you for your purchase of the Ambient Weather WS-09 8-Channel Wireless Refrigerator/Freezer
Thermometer. The following user guide provides step by step instructions for installation, operation
and troubleshooting. To download the latest manual and additional troubleshooting tips, please visit:
http://ambientweather.wikispaces.com/ws09
The probe thermometer allows you to measure the temperature inside a refrigerator or freezer, while
mounting the display on the outside of the refrigerator/freezer.
Wireless signals cannot pass through a metal barrier. If your refrigerator/freezer is constructed of
metal, the probe will have to be placed inside the refrigerator/freezer and the display/transmitter
outside the refrigerator/freezer.
In addition to the refrigerator/freezer application, the probe thermometer can be placed in any medium
where temperature is required, including ground temperature, air temperature and water temperature.
2
Getting Started
Note:
The power up sequence must be performed in the order shown in this section (insert
batteries in the remote transmitter(s) first, Display Console second).
The WS-09 weather station consists of a display console (receiver), and two probe thermometers for
the refrigerator/freezer.
Parts List
QTY
Item
1
Display Console
Frame Dimensions (LxHxW): 4.50 x 5.0 x 1.00 in
LCD Dimensions (LxW): 3.75 x 3.50”
LCD Segment Height: 1.25 inches
2
Probe thermometer transmitter with probe (FT007TP) for refrigerator/freezer
Dimensions (LxHxW): 4.5” x 2.0” x 0.75”
2
Suction cup mounts
2.1 Probe Thermometer Sensor Set Up
Note:
Do not use rechargeable batteries. We recommend fresh alkaline batteries for temperature
ranges between -4 °F and 140 °F and fresh lithium batteries for temperature ranges between -40 °F
and 140 °F.
