background image

 

Version 1.0  

 

©Copyright 2013, Ambient LLC. All Rights Reserved. 

 

 

 

Page 9 

Problem 

Solution 

Move the remote sensor to a higher location. Move the 
remote sensor to a closer location. 

Console and Remote Temperature do not 
agree 

Allow up to one hour for the sensors to stabilize due to 
signal filtering. The indoor and outdoor temperature 
sensors should agree within 2 °F (the sensor accuracy is 
± 1 °F). 
 
Use the calibration feature to match the indoor and 
outdoor temperature to a known source. 

Display console contrast is weak 

Replace console batteries with a fresh set of batteries. 

7

 

Accessories 

The  following  software  and  hardware  accessories  are  available  for  this  weather  station  at 

www.AmbientWeather.com

 

 

Accessory 

Description 

Ambient Weather WS-09-C 
WS-09 Console Only

 

Add as many display consoles as you like to your existing system to 
display the remote sensor in different locations. 

Energizer AAAS Lithium 
Battery (2-pack) - Batteries 
for Long Life and Cold 
Climates

 

AAA lithium batteries for cold weather climates. 

 

8

 

Liability Disclaimer 

Please help in the preservation of the environment and return used batteries to an authorized depot.   
The  electrical  and  electronic  wastes  contain  hazardous  substances.  Disposal  of  electronic  waste  in 
wild country and/or in unauthorized grounds strongly damages the environment. 
 
Reading the “User manual” is highly recommended. The manufacturer and supplier cannot accept any 
responsibility for any incorrect readings and any consequences that occur should an inaccurate reading 
take place. 
 
This product is designed for use in the home only as indication of weather conditions. This product is 
not to be used for medical purposes or for public information. 
 
The specifications of this product may change without prior notice. 
 
This product is not a toy. Keep out of the reach of children. 
 
No part of this manual may be reproduced without written authorization of the manufacturer. 
 
Ambient,  LLC  WILL  NOT  ASSUME  LIABILITY  FOR  INCIDENTAL,  CONSEQUENTIAL, 
PUNITIVE,  OR  OTHER  SIMILAR  DAMAGES  ASSOCIATED  WITH  THE  OPERATION  OR 
MALFUNCTION OF THIS PRODUCT. 

9

 

FCC Statement 

Statement according to FCC part 15.19: 

 

Summary of Contents for WS-091-C












Reviews: