Version 1.0
©Copyright 2016, Ambient LLC. All Rights Reserved.
Page 6
6
Glossary of Terms
Term
Definition
Accuracy
Accuracy is defined as the ability of a measurement to match the actual
value of the quantity being measured.
Range
Range is defined as the amount or extent a value can be measured.
7
Specifications
7.1 Measurement Specifications
The following table provides specifications for the measured parameters.
Measurement
Range
Accuracy
Resolution
Indoor Temperature
32 to 140 °F
± 1 °F
0.1 °F
Outdoor Temperature
-40 to 140 °F
± 1 °F
0.1 °F
7.2 Power Consumption
Base station (display console) : 4 x AAA 1.5V Alkaline or Lithium batteries (not included)
Battery life: Minimum 12 months with high quality batteries. Rechargeable batteries are
fine, but may not last as long.
8
Troubleshooting Guide
If your question is not answered here, you can contact us as follows:
1.
Email Support:
support@ambientweather.com
2.
Technical Support: 480-346-3398 (M-F 8am to 3pm Arizona Time)
Problem
Solution
Temperature seems inaccurate
Allow up to one hour for the console to stabilize after
installing batteries.
Use the calibration feature to match the temperature to a
known source.
Display console contrast is weak
Replace console batteries with a fresh set of batteries.
9
Liability Disclaimer
Please help in the preservation of the environment and return used batteries to an authorized depot.
The electrical and electronic wastes contain hazardous substances. Disposal of electronic waste in
wild country and/or in unauthorized grounds strongly damages the environment.
Reading the “User manual” is highly recommended. The manufacturer and supplier cannot accept any
responsibility for any incorrect readings and any consequences that occur should an inaccurate reading
take place.
