background image

 

Version 1.0  

 

©Copyright 2015, Ambient LLC. All Rights Reserved. 

 

 

 

Page 13 

Accessory 

 

Description 

Ambient Weather F007PF 8-Channel 
Wireless Pool and Spa Remote Sensor 

 

Add additional pool and spa 
thermometers. Supports up to 
eight remote sensors. 

Ambient Weather F007TP 8-Channel 
Wireless Thermometer with Dry 
Temperature Probe 

 

The remote sensor includes a 
water proof probe for measuring 
any dry temperature medium, 
including and refrigerators, 
freezers. 

 

9

 

Liability Disclaimer 

Please help in the preservation of the environment and return used batteries to an authorized depot.   
The  electrical  and  electronic  wastes  contain  hazardous  substances.  Disposal  of  electronic  waste  in 
wild country and/or in unauthorized grounds strongly damages the environment. 
 
Reading the “User manual” is highly recommended. The manufacturer and supplier cannot accept any 
responsibility for any incorrect readings and any consequences that occur should an inaccurate reading 
take place. 
 
This product is designed for use in the home only as indication of weather conditions. This product is 
not to be used for medical purposes or for public information. 
 
The specifications of this product may change without prior notice. 
 
This product is not a toy. Keep out of the reach of children. 
 
No part of this manual may be reproduced without written authorization of the manufacturer. 
 
Ambient,  LLC  WILL  NOT  ASSUME  LIABILITY  FOR  INCIDENTAL,  CONSEQUENTIAL, 
PUNITIVE,  OR  OTHER  SIMILAR  DAMAGES  ASSOCIATED  WITH  THE  OPERATION  OR 
MALFUNCTION OF THIS PRODUCT. 

10

 

FCC Statement 

Statement according to FCC part 15.19: 

 

This device complies with part 15 of the FCC rules. Operation is subject to the following two 
conditions:   

1.

 

This device may not cause harmful interference.   

Summary of Contents for WS-70















Reviews: