background image

Power Supply Combiner ABT-PSC48 

User Manual

6

This label may appear on the bottom of the apparatus due to space limitations.

Caution!

 To reduce the risk of electrical shock, DO NOT open covers. Refer servicing to 

qualified service personnel only.

 

Warning! 

To prevent fire or shock hazard, do not expose units to rain or moisture.

Warning!

 Installation should be performed by qualified service personnel only in 

accordance with the National Electrical Code or applicable local codes.

Warning!

 

Power disconnect:

 If the apparatus is mains powered and a power supply cord 

set is provided, the disconnect device is the mains plug of the power cord set.
If an AC DC adapter is provided and the mains plug that is part of the direct plug in device, 
the AC DC adapter is the  disconnect device. The socket outlet shall be near the apparatus 
and shall be easily accessible.

Old electrical and electronic appliances

Electrical or electronic devices that are no longer serviceable must be collected 
separately and sent for  environmentally compatible recycling (in accordance with 
the European Waste Electrical and Electronic Equipment Directive). To dispose of old 
electrical or electronic devices, you should use the return and collection systems put 
in place in the country concerned.

Only used at altitude not exceeding 2000 m.

Only used in non-tropical climate regions.

≤ 2000 m

Summary of Contents for ABT-PSC48

















Reviews: