Schleissheimer Straße 181 C | DE – 80797 Munich | phone +49 89 360 55 10-0 | www.ambient.de/en | info@ambient.de
© 2020, Ambient Recording GmbH
Power settings LED color:
•
Blue (default): 48V Phantom
•
White: 12V Phantom
•
Yellow: 12V T-Power
•
Red: Low battery, approx. 15min operation left
Note: Default setting is 48V phantom, but the unit will retain a previously selected mode. To
prevent damage caused by improper power mode, check the current active setting matches
your microphone before connecting it.
Check the setting while unit is on briefly tap the button. The Led will blink in the color of
the active setting.
Changing the power setting
Alternate between 48V and 12V Phantom: briefly tap the button twice. The unit will light
up the setting it would switch to. If you want to confirm, tap while LED is lit, to cancel,
wait. The unit will now blink 3 times in the color of the now active mode.
Enabling T-Power: tap 3 times. The LED will light up yellow. To confirm, tap the button
while LED is lit yellow. The unit will blink 3 times yellow to indicate T-Power is now
activated.
Disabling T-Power: tap button twice. The Led will light up blue. To confirm selection tap
button while LED is lit. The unit will blink 3 times blue to indicate 48V Ph is now
activated.
