33
AMC VIBRATION SENSOR / ©AMC VIBRO Sp. z o.o.
»
RF Status – bit coding is as follows, counting out from LSB (that is from the right side). The value
of 1 means the presence of the mentioned state:
1.
RF module error
Similarly, the namespace that lists the contents of fields for OPC communication is listed in the table 10.
The port used is 11664. The identifier of each field is of the string type. It starts with the type of sensor
followed by the id number followed by the group and field name (see table). Figure 27 shows the OPC
field structure for the Vibration sensor.
Table 10. OPC fields
Device type
Field name
ID
Vib
ra
tio
n
SE
N
SOR
TimeStamp
vs{x}.TimeStamp
Configuration
–
Active
vs{x}.conf.active
Configruration
–
Wakeup interval
vs{x}.conf.wakeup
Diagnostic
–
Batery life
vs{x}.diag.battLife
Diagnostic
–
Free memory
vs{x}.diag.freeMem
Diagnostic
–
Id
vs{x}.diag.id
Diagnostic
–
MAC
vs{x}.diag.mac
Diagnostic
–
RF Status
vs{x}.diag.rfStatus
Diagnostic
–
Status
vs{x}.diag.status
Diagnostic
–
Temperature
vs{x}.diag.temp
Diagnostic
–
Voltage supply
vs{x}.diag.voltSupply
Estimate Ch{n} - Band
vs{x}.est.ch{n}.band
Estimate Ch{n}
–
ISOvelRMS
vs{x}.est.ch{n}.ISOvelRMS
Estimate Ch{n}
–
accKURT
vs{x}.est.ch{n}.accKURT
Estimate Ch{n}
–
accRMS
vs{x}.est.ch{n}.accRMS
Estimate Ch{n}
–
accZP
vs{x}.est.ch{n}.accZP
Estimate Ch{n}
–
envPP
vs{x}.est.ch{n}.envPP
Estimate Ch{n}
–
envRMS
vs{x}.est.ch{n}.envRMS
Estimate Ch{n}
–
velRMS
vs{x}.est.ch{n}.velRMS
Estimate Ch{n}
–
velZP
vs{x}.est.ch{n}.velZP
Event Ch{n}
–
Alarm
vs{x}.event.ch{n}.alarm
Event Ch{n}
–
Warning
vs{x}.event.ch{n}.warning
