Power Source
The supply transformer has been designed for use AC 115V/230V(±10%) 60/50 Hz. Use Voltage
selection screw switch to select appropriate voltage.
DC power cource (24Vdc)
When using external batteries, ground the amplifier via the screw terminal (Electrical stability of the
system will be improved by providing a good earth ground.) When connecting batteries, ensure if
polarity is correct.
Microphone Connection
Mic1~5 inputs are XLR jack.
CD, Aux, Tuner, and Chime Connection (Input)
iMIX1 has ability to connect 3 auxiliary inputs, which may be used for connecting signal sources
such as a Radio Tuner, CD or Cassette player. The Aux input sockets are standard stereo RCA
connectors. The line level Controls on the front panel operate on each input source.
RCA plug connections
Sleeve - Screen
Pin - Signal
SLEEVE
PIN
Line out & record out connections
Outputs can be connected via XLR and RCA jacks. Choose right type connector to match your
equipment connector. Record out provides output for additional recording. Connect it to the input
of the recorder.
