www.amcelettronica.com
Installation Instructions
soutdoor L
1 2 3 4 5 6
FUNCTIONS
1 2 3 4 5 6
FUNCTIONS
1 2 3 4 5 6
FUNCTIONS
1 2 3 4 5 6
FUNCTIONS
Lenses provided
The lenses mounted on the sensor are: volumetric for PIR 1 (upper), horizontal curtain for PIR 2 with rather thick
beams. This solution is designed for almost all applications that require a standard installation at about 1.8/2 meters
high, with the possibility of managing the presence of animals. (fig. above)
Besides the standard configuration, you can use the optional lenses included in the package.
Using the sensor with 2 horizontal curtain lenses:
you can position the sensor at a height between 80 cm and 1.2
m based on need. Then adjust the board position based on the beam range.
This way you have a variable height protection from 35/40 cm from the ground and up to 1.6 cm high with a horizontal
coverage of about 80/100 degrees. With this configuration you can achieve immunity to medium to large animals even
at considerable distances (15 m).
Using the sensor with 2 vertical curtain lenses:
the use of vertical curtain lenses is based on the need to protect
doors and windows with a vertical curtain that is no wider than 50 cm. In this way the protection is only near the doors
and/or windows without extending into other areas. You can position the sensor at a height of between 1 m and 2 m
based on need. The beam is about 50 cm wide for an aperture of about 90/100 vertical degrees (fig. below)
1 2 3 4 5 6
FUNCTIONS
The lenses are attached to the sensor with funnels that are snapped into the housings on the front cover (fig.)
Replacing the lenses