Forward
Left
Right
Backward
Headless Mode
HOW TO GET ENABLE/DISABLE HEADLESS MODE?
Press the button on controller(as shown in Figure A on the right)
when pressed you will hear a beep sound indicating the drone is in
headless mode. To quit headless mode, press it again and you will
hear another beep sound indicating that headless mode has been disabled.
HOW TO RECOGNIZE THE " FORWARD
SIDE" UNDER HEADLESS MODE?
When the drone initially takes off and the LED
lights on the device stop flashing the drone will
have its front side to the front direction of the controller.
The red LEDs on the drone indicate the front/forward side,
the green LEDs indicate the rear of the drone.
If you want to reset the orientation of headless mode,
you need to turn off the device and auto calibrate it.
1
2
-7-
Headless mode
is used to
align the drone’s movements to be
relative to the controller no matter which way the drone is facing.
Figure A.
