Adjusting a Time Lapse Interval
By default, the camera will be set to record a time lapse
interval of 0.5 seconds. This can be adjusted to either, 1s, 2s, 5s,
10s, 30s, or 60s from the camera directly.
To change the interval, press and hold the OK button. Use the
down arrow on the side of the camera to highlight the Settings
( ) icon and press OK.
Press the OK button to access the time lapse menu then use
the down arrow on the side of the camera to highlight the Rec
Interval menu. Press the OK button.
Use the up and down arrows on the side of the camera to
select an interval and press the OK button to confirm.
To return to the live view screen, press the Mode/Power button
twice to highlight the go back icon and press OK to exit.
Using Auto Snap Mode
1. Turn the camera on using the Mode/Power button then press
and hold the OK button to access the main menu.
2. Press the OK button to enter the Camera menu. Use the
down arrow button on the side of the camera to highlight the
Auto Snap feature and press OK.
-13-
