7
Adjust the Mobile Device Height into Position
1.
Turn Dial 2 located on the top of the mobile device mount and extend the diameter of Holder 2.
Try it on the eyepiece of your spotting scope, but do not secure it.
2.
Loosen Dial 3 on the back of the mobile device adapter mount and adjust your phone up and
down or left and right until the lens of your phone’s camera is facing the center of Holder 2.
Note:
This is to ensure the pictures are at the center of your phone screen.
3.
Tighten Dial 3 to fix the position. Make sure not to overtighten it; prepare for later adjustment.
Use for Digiscoping
1.
Insert the eyepiece of the spotting scope into Holder 2 and turn Dial 2 to fix the phone adapter
to the eyepiece. Make sure not to overtighten the adapter to the eyepiece.
2.
Once the phone adapter is secure to the spotting scope, turn your phone camera on. You can
adjust your phone camera until you find the most accurate position.
3.
When adjustment is complete, turn Dial 3 to the phone camera into position.
4.
Adjust the focus knob of the spotting scope to fixate the scope on the target. When a clear shot
is acquired, you can use your mobile device to take pictures/video of the object.
