41
Below is a description of the features in this menu:
No.:
Provides the order in which the IVS rules will be displayed in the menu.
Name:
Allows the user to customize a name for their rule. Double click the name in the Rule column to modify.
Rule Type:
This dropdown menu allows the user to select an IVS rule type (Tripwire or Intrusion).
Schedule:
Allows the user to set a schedule in which the IVS rule will be triggered.
Action:
These checkboxes allow the user to choose a parameter filter that will activate a trigger if an object were
to cross or appear in the set intrusion area.
Cross
: The rule will trigger when a target enters or exits the area.
Appears
: The rule will trigger when a target appears inside the area.
Direction:
This dropdown menu allows the user to choose whether the rule will be triggered if an object enters,
exits, or enters & exits a set line or area.
Object filter
: The object filter checkboxes allow the camera to be triggered only when a specific object, such as a
human or car, is detected by the camera. Both effective object checkboxes can be activated at the same time.
Human:
This checkbox allows the camera to be triggered only when a human figure is detected.
Motor Vehicle:
This checkbox allows the camera to be triggered only when a vehicle has been detected.
Record:
This checkbox allows the user to enable the camera to record video when an IVS event is triggered.
Record Delay
: This field specifies, in seconds, how long the delay between IVS events should be. The default is 10
seconds however this can be modified between 10~300 seconds.
Relay Out
: This checkbox allows the user to enable the camera to trigger a connected alarm (connected to the
alarm port on the back of the camera) when a motion detection alarm is triggered.
Alarm Delay
: This field specifies in seconds how long the delay between alarm activation and Relay alarm
activation should be.