5
IMPORTANT:
Due to specific hardware limitations within your camera it is important to note that these devices will
not be able to automatically pan/tilt or pivot in either the app or via the web UI on a computer. For this reason, it
is imperative to make sure to mount the cameras properly and position them as efficiently as you can to the areas
you wish to monitor. All positioning actions to the camera will have to be performed manually.
Installation Guide
The camera will come with the included items which are needed for the physical installation of your camera.
What's Included?
•
The camera
•
The Installation Bracket
•
An Installation template (sticker)
•
Pack of wall anchors and screws
•
Ethernet cable protectors
Tools needed for the job
•
A Phillips head screwdriver
•
A drill
•
A 1" Paddle bit (Optional)
•
An Ethernet cable
Inserting a MicroSD card
The camera is compatible with a microSD card, class 10 or higher, with a max storage capacity of 256GB. To insert a
microSD card, use a Phillips head screwdriver to remove the microSD card/reset button hatch. Locate the microSD
card slot and insert your microSD card. Press and release to secure the card inside the camera. Place the hatch
back onto the camera and secure using your Phillips head screwdriver.