7
Installation Cable Through the Side Cable Tray
Step 1:
Place the installation template sticker on the mounting surface. Then, using a drill, drill 3 installation holes.
Step 2:
Place the included wall anchors into the installation holes.
Step 3:
Align the holes on the installation bracket to the installation holes. Also make sure to align the "
Front
" and
"
Up
" portions of the bracket to the installation sticker.
Step 4:
Remove the side cable tray insertion piece on the camera and insert the cable making it flush to the bottom
bracket surface.
Step 5:
Align the “Front” tab of the installation bracket to the
notch on the camera insert the
camera and move forward to secure the camera to the installation bracket.