33
NOTE:
Before adding a camera to your NVR it is highly recommended to set the
camera’s
IP address to
Static.
If the device does not have
a static IP address assigned in the system, there could be a compromise in the integrity of the connection if the NVR loses power or resets.
For more information on how to set a static IP for your camera visit:
amcrest.com/staticIP
To add a camera to the NVR, click on
“Device Search”
and use the mouse to select which camera you would like to add. To add the camera
into the added device section, click the
Add
button.
If the
Status
of the camera is red that means the device is not properly connected to the device or the password
has not been entered correctly. To enter the log in credentials for your camera click on the
icon in the
Modify
section. In this section you will see the credentials for your camera. Enter the username and password for the
camera you are adding into the username and password field. If this is your first-time logging into your camera,
the username and password will be
admin
. After you have entered the credentials for your camera, click
Save
to
save and apply the settings to your device.
Once you are satisfied with the settings on this screen, click the
Next Step
button at the bottom of the screen.
Summary of Contents for NV21 Series
