To calibrate your drone, make sure the drone is turned off. Place the
drone on a level surface and then turn the drone on using the power
button.
The indicator light of the drone will begin to flash, red, blue, and green
which indicates the drone is calibrating.
Make sure to keep the drone in a balanced position during calibration.
The green LED light will remain solid after the calibration process has
been completed.
6. Flight Calibration
To stop, grab the drone while in flight. You can also flip the drone
over to stop operation.
7. Stop Flying
8. Charging
When the indicator LED on the top of the drone turns red it means
the drone is running low on battery and needs to be charged.
Charging time for the drone is about 30 minutes. When charging, the
LED on the USB charger will remain solid. When charging complete,
the LED will turn off.
Please use the included USB charging cable to charge the drone.
9. Flight Time
A drone with a fully charged battery can have about 5 minutes of flight
time depending on the flying conditions and overall useage during
operation.
10. Warning
Do not use the drone during high wind or in strong light.
Do not operate the drone in a narrow or cluttered environment.
Do not put any heavy objects directly on the drone.
To charage, connect the USB charger to a USB port on a PC and
connect the other end of the cable to the charge port of the drone.
