Chapter 4
Reference
Troubleshooting
Video is unstable or only black and white.
•
Check that you are using the correct broadcast standard format.
•
Check the quality of the incoming TV signal on another receiver.
•
Connect your tuner directly to the cable TV or antenna source. Splitters can
degrade the signal.
No video or audio.
•
Check that the AC power adapter connected to your TV Wonder™ 650 is the
model PSM11R-060 adapter that was packaged with your product.
•
If the LED indicator on the front of the device is not lit, check the cabling to
make sure the device is receiving power. If the device has been running for
a lengthy period of time, disconnect it to let it cool, then reconnect and check
that the LED light is on.
•
Check that the speakers are connected and turned on.
•
Check that your system's sound device is working properly (
Control Panel
▷
Sounds and Audio Devices)
.
•
Make sure the monitor is plugged in, turned on, and connected to the
computer.
•
Make sure the cable or antenna is connected.
•
Check that all connectors are securely plugged in to the correct jacks.
•
Check that the tuner is securely connected.
Recording stops unexpectedly.
•
Make you have sufficient disk space to accommodate the recording.
•
Make sure you are recording to the correct hard disk. Check your software
manual for instructions on determining the target drive and folder for your
recordings.
•
The maximum file size for the FAT32 file system is 4 gigabytes.
•
Disable screen savers while recording.
•
Disable Power Management while recording.
