TABLE 1 – ZODIAC INSPECTION FORM
Type of Inspection
(Circle One)
50 100 500 1000
Symbols: + Indicates perform task, - Indicates do not perform task
Task
Refer to
Intervals
(Flight Hours)
Initials
50
100
500
1000
Wing Group
1.
Check the torque and safeties of the front
spar, main spar and rear spar wing to
fuselage attachment bolts.
2.
Inspect the external surfaces of the
ailerons and flaps for cracks, deformation,
etc.
3.
Inspect the aileron and flap hinge pins for
corrosion, wear, safeties and adequate
lubrication.
4.
Inspect flap and aileron rods and rod
attachment bolts for wear, damage
safeties, etc.
5.
Inspect aileron bellcranks, stops, cable
ends and pulley assembly for cracks,
damage, corrosion safeties, etc.
6.
Inspect upper and lower wing skins and
leading edges for cracks, loose fasteners,
damage, etc.
7.
Lubricate the aileron and flap hinges,
control rod ends, bellcranks, etc.
8.
Inspect the dual landing/taxi lights for
security, clean lenses, etc.
9.
Drain water from wing fuel tanks (if
applicable) using sump drains. Check
sump drains for leaks. Clean fuel
strainers.
10.
Check fuel tank filler caps (if installed)
for security, condition, etc.
11.
Perform an operational check of the stall
warning system (option).
AC 43-13-1B Section 3
See AMD Safety Alert of
October 2008
See AMD Notification
letter of January 2009
-
+
+
+
+
-
-
-
-
-
-
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
3-8
July 09
Inspection page 6 of 8
