Installation and Operating Instructions for the iAdapter™Mini
Designed by AMDi
www.amdi.net
Adjusting the volume on the
iAdapter™Mini
and using the By-Pass feature:
The volume control on the
iAdapter™Mini
is different
from the volume control on the iPad®. The volume control
on the
iAdapter™Mini
only changes the volume from the
amplifier inside the
iAdapter™Mini
which is plugged into
the headset jack of the iPad®mini.
To change the volume from the amplifier on the
iAdapter™Mini
, slide the volume control switch to either
Low or High. (Refer to the picture to the right). When the
switch is in the OFF position the amplifier is by-passed and
the sound will play directly out the speaker on the back of
the iAdapter by-passing the amplifier. If the battery in the
iAdapter looses power you can still use the iAdapter to
play audio, but there is no amplification.
Charging the battery inside the
iAdapter™Mini
and the Low battery indicator:
The charging jack on the
iAdapter™Mini
only charges the
battery inside the
iAdapter™Mini
for the amplifier. Plug
the USB cable supplied with the
iAdapter™Mini
into the
USB Charger Input jack on the side of the
iAdapter™Mini
(see picture at right). Plug the other end of the USB cable
into the USB Charger supplied with the
iAdapter™Mini
and then plug the charging adapter in a wall socket. The
Charger LED on the side of the
iAdapter™Mini
will light
RED and the LED on the charging adapter will turn GREEN
showing power is connected to the charging adapter and
the iAdapter. When the Charger LED on the iAdapter
changes to GREEN the battery is fully charged. It is
recommended that you slide the volume control switch to
the OFF position while charging the battery of the
iAdapter.
The charging LED on the side of the iAdapter is also a
battery low indicator. It will Flash RED when the battery is
down to 30% capacity, warning you that the battery is low
and will need to be charged soon.
Connecting a headset to the iAdapter™:
Plug your headset into the jack labeled with a Headset
symbol on the
iAdapter™Mini
(see picture to the right).
When you plug your headset into the Headset Jack of the
iAdapter™Mini
all audio will be played into the headset
and not through the speakers on the back of the
iAdapter™Mini
.
iAdapter™Mini Charger
iPad®mini
& LED charging port
USB Cable USB Charger
