Amedia Networks, Inc.
DMA3.1L User Manual
Figure 1 DVD IR Sensor
8 Wireless AV Receiver Setup
•
Connect video output (composite or S-video) to TV.
•
Connect stereo audio output to TV.
•
Connect power supply.
9 System
Status
1.
Upon power on, the Power LED will be on.
2.
After system boot up (up to 10 seconds on the Wireless AV Sender), the Link LED will blink
indicating acquisition mode.
3.
When communication is established between the Sender and Receiver, the Link LED will stay on
indicating tracking mode.
4.
In tracking mode, video and audio input signal at the Wireless AV Sender is sent wirelessly to the
video and audio output at the Wireless AV Receiver.
10 Functional Specifications
10.1 Audio and Video Inputs at the Wireless AV Sender
The DMA3.1L system transmits audio and video signals from the Wireless AV Sender to the Wireless
AV Receiver, by encoding and multiplexing the signals according to MPEG-2 standards. The Wireless
AV Sender includes video and audio inputs.
10.1.1
Video Inputs
a) The Wireless AV Sender supports the following video inputs:
-
Composite Video input
-
S-Video input
Amedia Networks, Inc.
2006 Amedia Networks (Unpublished)
5
©
Confidential & Proprietary
