4211-1901 07/13/18
page 3
AX Chromatherapy-White Light Kit
Installation and Operating Instructions
Additional Light Assemblies
For your convenience, two LEDs connection are included in the Chroma kit. Up to 5 LED light assemblies may be added
by splicing their harness wires in parallel with the fi rst two LEDs (for a maximum 7 LEDs). For additional LED lights, order
the Single Lamp Kit, Amerec's part number 9223-112
Operation
The lights are low power LED assemblies with built in intelligence providing an array of pre-programmed light displays
and easy synchronization of multiple lights. The last display selected will be active the next time the lights are turned
on.
• To synchronize lights, such as after adding or replacing a light, turn the lights on then turn them off again for 6 to 8
seconds, then turn them on again. When the lights turn on again, they will blink a few times then all the lights will be
reset to the initial display.
• To change light displays, turn the lights off for 1 to 3 seconds then turn them on again. Repeat until your preferred
display is lit.
Description of displays (
in order
):
• Bright White
• Aqua Blue - a light blue/green mix.
• Soothing Violet - a light blue/red.
• Ocean Blue - pure blue.
• Majestic Gold - a red/green mix.
• Shamrock Green - pure green.
• Fiery Red - pure red.
• Chameleon Mode - a slow fade through all the colors in a repeating sequence.
• Party Mode - fast, random changes through all the colors.
1
2
3
4
Provided
1
1
2
2
Part #
3164-51
5268-12
3160-77
3160-54
Description
Transformer, 120VAC-12VAC
(with wire harness with light socket)
Wire Harness with Light Socket, 8 ft
Light, 12 LED, Chroma and White
Lens Assembly
Item
Contact Technical Support for additional/replacement parts.
3
2
1
4
P.O Box 2258 Woodinville, WA 98072
Phone: 425-951-1120
800-363-0251
Fax: 425-951-1130
email address: support@amerec.com
9223-216 KIT,CHROMATHERAPY-WHITE,AX
