The B includes the universal harness in order to connect the B to power
All open wire connections should be soldered and protected against water and dust for best long
term performance.
1.3 12-pin Harness Connection
1. Make sure the outside surface is clean and
clear of debris.
2. The B Media Player has four (4)
mounting screws. Drive the screws using a
screw driver. Make sure screws are snug and do
not over tighten.
1.4 Mounting the B Media Player
195mm
119mm
127mm
59mm
46mm
+12V DC (4)
No lower than a 2 Ohm load should be used
or damage may occur to the B
Media Player.
Make sure the polarity of speakers are
connected correctly.
Power Antenna (7)
Fuse Box
No lower than a 2 Ohm load should be used
or damage may occur to the BlueCube Media
Player.
Make sure the polarity of speakers are
connected correctly.
(White/strip)
(Yellow color)
(Red color)
Getting Started
B Media Player
4
and speakers.
4211-158 05/18/16
