3
Heavy Duty Office Paper Shredder Manual 2014 v.1
Your new Ameri-Shred shredder has been secured to a pallet for shipping. Please inspect equipment immediately
for shipping damage.
Using a pallet jack or fork truck with a minimum
capacity of 500 pounds, remove the machine
from the carrier and transport to operation
site. Remove pallet and discard responsibly.
Remove top cover and remove bolts marked
“A” (shown in Figure 1) to remove pallet.
WARNING Top Cover must be reinstalled before
running.
Remove shredder stand from pallet.
Open plastic bag and place through the bag
holder allowing 4 to 5 inches to drape over rim.
Remove shredder from pallet.
Position your shredder on the stand. Place
shredder feet into holes (4) in the shredder
table so that the shreds will drop freely into the plastic bag. See Figure 2 for reference.
Remember to always pull the shredder stand, rather than push, when moving your paper shredder.
UNLOADING/UNPACKING
Figure 2
BAG HOOP
Figure 1
STAND SIDE
CENTER BRACE
BOTTOM PAN
SMALL SHELF
LARGE SHELF
STAND SIDE
CLIP NUT
BUTTON HEAD BOLTS ARE USED TO BOLT
TOGETHER STAND SIDE & CENTER BRACE
