4
Hardware Package Description
PHP
—Platform Hardware Pack (one per platform): used to install legs, guard rails, closure kits, and BPs.
(3) 3/8” - 16—4.5” SS Bolt used for guard rail and closure kit connections
(4) 3/8” - 16—.75” SS Bolt used to secure leg supports in corner sockets
(3) 3/8” SS Nut
(6) 3/8” SS Flat washer
(11) #14 x 1” Tek screw—SS 3/8” hex head
(16) 5/8” Black plug used to fill open bolt holes
(2) U-channel rail and closure stabilizer used to secure bottom of loose rails
RHP
—
Ramp Hardware Pack (one per ramp section): used to install legs, inserts, and guard rails.
(2) 3/8” - 16—5” SS Bolt used for guard rail to guard rail and ramp guard rail to platform guard rail connections
(4) 3/8” - 16” .75” SS Bolt used to secure leg supports and inserts in lateral sockets
(2) 3/8” SS Nut
(4) 3/8” SS Flat washer
(6) #14 x 1” Tek Screw—SS 3/8” hex head
(2) 5/8” Black plug used to fill open bolt holes
LHPC
— Loop Hardware Pack Commercial (one per loop): used to secure loops to ramp and platform guard rails.
(2) 3/8” - 16—5” SS Bolt used to connect the top of the loop to the ramp and platform guard rails
(2) 3/8” SS Nut
(4) 3/8” SS Flat washer
(2) #14 x 1” Tek Screw—SS 3/8” hex head
(2) 5/8” Black plug used to fill open bolt holes
90H
—90 Degree Hardware Pack (one per 90°): used to create a 90° connection from hand rail to hand rail.
(1) Aluminum 90° elbow used to connect hand rail to hand rail
(2) Aluminum insert used to connect the elbow to the hand rail
(2) Black rubber O-ring—positioned in the middle of the insert and used as a spacer between the elbow and hand rail
(4) 3/4” Tek Screw—SS Pan head phillips
GBHP
—Hand Rail Hardware Pack (one per bracket): used to secure the hand rail brackets to the ramp and platform guard
rails.
(1) 3/8” - 16—2.5” SS Bolt used to connect hand rail bracket to guard rails
(1) 3/8” SS Nut
(2) 3/8” SS Washer
(2) 3/4” Tek Screw—SS Pan head phillips
RINSERT
—Round Inserts: used to connect hand rail to hand rail and hand rail to loops at the bottom of the ramp
(4) Aluminum insert used to connect hand rail to hand rail and hand rail to loops
(4) Black rubber O-ring—positioned in the middle of the insert and used as a spacer between hand rails and bottom
loops to hand rails
(8) 3/4” Tek Screw—SS Pan head phillips