9
Model ERV200S
Date: ___________________________________________
Tag: _____________________Qty:___________________
Project: _________________________________________
Engineer: _______________________________________
Contractor: ______________________________________
Supplier: ________________________________________
Quote#: _________________________________________
Submitted by: ____________________________________
All units conform to
CSA and UL standards.
20
40
60
80
100
120
140
160
180
200
220
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
3 - Medium Speed
2 - Medium Low Speed
1 - Low speed
4 - High Medium Speed
5 - High Speed
Speed 5
Speed 4
Speed 3
Speed 2
Speed 1
Air
Flo
w
(cfm
)
Static Pressure (in. w.g.)
*Sensible Efficiency – thermal **Latent Efficiency – moisture
Note: Effectiveness - based on temp. differential between the 2 airstreams
Efficiency – takes into account all power inputs
ENGINEERING DATA
LATENT RECOVERY/MOISTURE TRANSFER CORE
The cross-flow energy recovery core transfers heat and water vapor between the two
airstreams. It is easily removed for cleaning or service.
MOTORS AND BLOWERS
Each air stream has one centrifugal blower driven by a common PSC motor. 5 speed
fan operation.
FILTERS
Washable air filters in exhaust and supply air streams.
MOUNTING THE ERV
Four threaded inserts at corners of case designed to accept four PVC reinforced
polyester straps that are supplied with the unit.
CASE
Twenty gauge prepainted galvanized steel (G60) for superior corrosion resistance.
Insulated to prevent exterior condensation.
WEIGHT
75 lbs (34Kg)
SHIPPING WEIGHT
77 lbs (38 Kg)
PREMIUM SERIES ELECTRONICS
• Built-in Relay for Interfacing to furnace
• Built-in Dehumidistat disable feature
CONTROLS & ELECTRONICS
The
Premium Series Digital Control
(Model ADXC-II) is included with unit and can be
wall mounted in a central location of the home.
• 2 Speed Operation on each mode
• 2 user selectable operational modes: Continuous Ventilation and 20 ON/40 OFF
• Adjustable Dehumidistat function built into the main wall control
• Connected to 3 wire 20 gauge low voltage wire
OPTIONAL PROGRAMMABLE CONTROL
Premium Series Digital Control
(Model APVC) - contains all the features of the Premium
Series Digital Control with 5 speeds and 7/24 programmable ventilation,
(3 wire) 20 gauge wire (min.) 100' length
OPTIONAL TIMERS
DET-II
20/40/60 Minute Timer
- Initiates high speed ventilation for 20, 40, or
60 minutes, (3 wire) 20 gauge wire (min.) 100' length
28998
Mechanical Timer
- Initiates High speed ventilation for up to 60 minutes,
(2 wire) 20 gauge wire (min.) 100' length
OPTIONAL ACCESSORIES
DH-II
Dehumidistat
-
Initiates high speed ventilation when the indoor humidity
level is above the set point. (3 wire) 20 gauge wire (min.) 100' length
22026
Weatherhoods
,
Two - 6” (150 mm) c/w 1/4” (6 mm) mesh screen
ZRT-1 Zone Register Terminal
permits intermittent ventilation control at any exhaust
terminal, controlled by local timer switch, simultaneously turns HRV/ERV
on high speed. Suggested use: bathrooms.
ZRT-2 Zone Register Terminal
permits constant low airflow with boost exhaust,
controlled by local timer switch, simultaneously turns HRV/ERV on high
speed. Suggested use: bathroom and shower areas.
Constant Exhaust Registers:
Airflows remain constant while other zones are turned on
and HRV/ERV runs at high speed. Suggested use: laundry areas and pet
rooms.
WARRANTY
Units carry a five (5) year
warranty on the energy
recovery core and a two (2)
year replacement parts
warranty.
Performance
(HVI certified)
Net supply air flow in cfm (L/s) against external static pressure
E.S.P
(external static pressure)
[cfm (L/s)]
@ 0.1" (25 Pa)
180 (85)
@ 0.2" (50 Pa)
169 (79)
@ 0.3" (75 Pa)
157 (74)
@ 0.4" (100 Pa)
146 (69)
@ 0.5" (125 Pa)
132 (62)
@ 0.6" (150 Pa)
118 (55)
@ 0.7" (175 Pa)
101 (47)
@0.8 " (200 Pa)
82 (39)
Sensible Effectiveness
@ 66 cfm (31 L/s)
32°F (0°C)
81%
*Sensible Efficiency
@ 66 cfm (31 L/s)
32°F (0°C)
72%
Total Efficiency
@ 117 cfm (55L/s)
95°F (35°C)
50%
VAC @ 60HZ
120
WATTS / Low speed.
68
WATTS / High speed
97
Amp rating
1.4
STALE AIR
TO OUTSIDE
FRESH AIR
FROM OUTSIDE
STALE AIR
FROM INSIDE
FRESH AIR
TO INSIDE
14
3
/
4
"
(375)
19" (483)
*
All Duct Connections 6"(150mm)
FILTERS
BLOWERS
*NOTE:
Front clearance
of 25 inches (635 mm)
is recommended
for servicing unit.
MOTOR
ENTHALPIC CORE
33-5/8"
(850)
BALANCING
DAMPER
BALANCING
DAMPER
CORE
DIMENSIONS ERV200S
inches (mm)
Summary of Contents for Heat Recovery Ventilator HRV 120SRD
Page 35: ......
