1) The player has completed the cue or pause operation and is waiting for the play start command.
2) When the PLAY/PAUSE button is pressed, playback starts and the cue point is stored in the memory.
3) Playing
4) The pause mode is set when the PLAY/PAUSE button is pressed again.
5) Pausing
6) Playback resumes when the PLAY/PAUSE button is pressed again. The new cue point is stored
in the memory.
7) Playing
6. Pausing
•
Press the PLAY/PAUSE button to switch between play and pause.
•
The PAUSE indicator lights when the pause mode is set.
•
Figure 12 shows the relationship between the play and pause.
Fig. 11
Fig. 12
American audio • DCD-PRO200MKIII™ INSTRUCTIONS MANUAL • PAGE 10
5. Stopping Playback
•
There are two ways to stop playback.
1) Press the PLAY/PAUSE button during playback to pause at that point. (figure 10)
2) Press the CUE button during playback to return to the position at which playback started.(Back Cue)
(Figure 11)
BASIC OPERATION (CONT.)
Fig. 10
4. Starting Playback
•
Press the PLAY/PAUSE button during the pause or cue to start playback.
•
The PLAY indicator lights when playback starts.
•
The point at which playback starts is automatically stored in the memory as the cue point. The pickup
then returns to the cue point (the point at which playback started) when the CUE button is
pressed. (Back Cue) (Figure 10)
PLAY
/ II
PAUSE
CUE
