another, that disc too will have a +2% pitch. The
amount of pitch being applied will be displayed in
the
LCD (14).
Use this slider to match the BPM’s
of this unit to that of another music source. By
changing the pitch of one disc with respect to the
other in this way, the beats can be matched.
24. BPM BUTTON -
This changes toggles
between the PITCH function and BPM function
indicators in the LCD. When the BPM function
is engaged, the
COUNTER (25)
button may be
used to manually display a tracks BPM's in the
LCD (14)
. When the BPM function is disengage,
a tracks pitch value will be displayed in the
LCD
(14).
25. COUNTER BUTTON -
When the unit is BPM
mode, tapping this button to tracks beat will
determine a tracks BPM's. The BPM value will
be displayed in the LCD.
26. IN REAL-TIME CUE (SEAMLESS LOOP IN
BUTTON) -
“CUE ON THE FLY” - This button
allows you to set a CUE POINT (see CUE POINT
page 18) without music interruption (“on the fly”).
This button also sets the starting point of a loop
(see SEAMLESS LOOP on page 21).
27. CUE -
Pressing the
CUE
button during play-
back immediately pauses playback and returns
the track to the last set cue point (see setting a
CUE POINT, page 20). The red CUE LED will
glow when the unit is in cue mode The LED
will also flash every time a new CUE POINT
is set. The CUE button can be held down to
momentarily play the CD. When you release the
CUE button it instantly returns to the last set
CUE POINT. You can also tap the CUE button
to create a BOP EFFECT (for definition of BOP
EFFECT, see page 24).
28. OUT/EXIT -
This button serves two functions;
1) This button is used to set the ending point of
a loop. 2) During normal loop playback, a loop is
exited by pressing the
OUT/EXIT BUTTON
.
29. PLAY/PAUSE BUTTON -
Each press of the
PLAY/PAUSE BUTTON
causes the operation to
change from play to pause or from pause to
play. While in play mode the green play LED will
glow, and while in pause mode the green play
LED will flash.
30. RELOOP/BOP BUTTON -
This button serve
tow functions;
A. RELOOP;
If a
Loop
has been made (see
setting a Seamless Loop on page 21), but
the unit is not actively in
Loop
mode (a loop
is not playing), pressing the
RELOOP/BOP
BUTTON
will instantly reactivate Loop mode.
To exit the
Loop
, press the
OUT/EXIT BUT-
TON (28). LOOP (65)
and
RELOOP (64)
will
display in the
LCD (14)
when the
Reloop
function is available.
B. BOP;
This button is used to activate the
BOP Effect. A Bop Effect is a stutter, creating
a sound similar to a CD skipping. This func-
tion will instantly play the last set cue point
during playback without music interruption.
The Bop Effect can be created in 2 ways. See
creating a BOP on page 24.
31. CHANNEL 2 CONTROLLER JACK -
Connect
the supplied mini-plug from CUE jack on the
rear of your unit to a compatible American DJ
mixer’s CONTROL out. This will enable the CD
"Q-Start" function. This feature is only available
on American DJ’s “Q” series mixers.
32. CHANNEL 2 REMOTE JACK -
Connect the
supplied 8 pin din cable from this jack to the
player's channel 2 remote connector. This will
allow you to control the player functions.
33. CHANNEL 1 CONTROLLER JACK -
Connect
the supplied mini-plug from CUE jack on the
rear of your unit to a compatible American DJ
mixer’s CONTROL out. This will enable the CD
"Q-Start" function. This feature is only available
on American DJ’s “Q” series mixers.
34. CHANNEL 2 REMOTE JACK -
Connect the
supplied 8 pin din cable from this jack to the
player's channel 1 remote connector. This will
allow you to control player 1's functions.
GENERAL FUNCTIONS AND CONTROLS - REMOTE UNIT CONT.
©
American Audio
®
- www.americandj.com - DIGI-PRO™ Instruction Manual Page 11
