©
American Audio
®
- www.AmericanAudio.us - Flex 100MP3 Instruction Manual Page 23
Figure 28
Figure 27
PITCH ADJUSTmENTS
1. PITCH SLIDER (7):
This function will increase or decrease the tracks playback speed or "PITCH."
The maximum pitch percentage manipulation in this function is +/-100%. The
pitch Slider (7)
is used to decrease or increase the playback pitch. If the
slider is moved up (towards the top of the unit) the pitch will decrease, if the
slider is moved down (towards the bottom of the unit) the pitch will increase.
The
pitch Slider (7)
adjustment can be changed to range from +/-4%, +/-8%,
+/-16%, or +/-100% (See changing "PITCH SLIDER PERCENTAGE RANGE" on
the next page). This pitch adjustments will effect normal playback and loops only
when the
pitch on/off Button (3)
is turned on.
Using the Pitch Slider (7):
Be sure the pitch function has been activated as
described above. To use the
pitch Slider (7)
slide the slider up and down.
Down will increase the pitch and up will decrease the pitch.
Activating the Pitch Slider (7):
To activate the
pitch Slider (7)
you must
turn on the pitch adjustment function. Press the
on/off Button (3)
located
at the top right of the unit. The
on/off Button (3)
LED will glow when the
function is activated. If the pitch function is not activated the
pitch Slider
(7)
will not function.
PITCH ADJUSTmENTS:
You can activate the
pitch Slider (7)
by pressing the
pitch on/off Button (3)
. When the button LED is lit,
the
pitch Slider (7)
is active and the pitch can be adjusted. The different pitch adjustments allow a track's or
a loop's playback speed to be manipulated. This speed manipulation is commonly used to beat match between
two or more music sources such as a turntable or another CD player. The playback speed may be increased or
decreased by a factor of +/-100. The next section details the different pitch manipulation schemes.
Figure 29
