background image

1-YEAR LIMITED WARRANTY

A.  American Audio

®

 hereby warrants, to the original purchaser, American Audio

®

 products to 

be free of manufacturing defects in material and workmanship for a period of 1 Year (365 days) 
from the date of purchase. This warranty shall be valid only if the product is purchased within the 
United States of America, including possessions and territories. It is the owner’s responsibility to 
establish the date and place of purchase by acceptable evidence, at the time service is sought. 
B.  For warranty service, send the product only to the American Audio

®

 factory. All shipping 

charges must be pre-paid. If the requested repairs or service (including parts replacement) are 
within the terms of this warranty, American Audio

®

 will pay return shipping charges only to a 

designated point within the United States. If the entire instrument is sent, it must be shipped 
in its original package. No accessories should be shipped with the product. If any accessories 
are shipped with the product,  American Audio

®

  shall  have no liability whatsoever for loss of 

or damage to any such acces-sories, nor for the safe return thereof.  
C.  This warranty is void if the serial number has been altered or removed; if the product is 
modified in any manner which American Audio

®

 concludes, after inspection, affects the reli-

ability of the product; if the product has been repaired or serviced by anyone other than the 
American Audio

®

 factory unless prior written authorization was issued to purchaser by Ameri-

can  Audio

®

;  if  the  product  is  damaged  because  not  properly  maintained  as  set  forth  in  the 

instruction manual. 
D.  This is not a service contract, and this warranty does not include maintenance, cleaning 
or periodic check-up. During the period specified above, American Audio

®

 will replace defec-

tive parts at its expense, and will absorb all expenses for warranty service and repair labor by 
reason of defects in material or workmanship. The sole responsibility of American Audio

®

under 

this warranty shall be limited to the repair of the product, or replacement thereof, including 
parts, at the sole discretion of American Audio

®

. All products covered by this warranty were 

manufactured after January 1, 1990, and bear identifying marks to that effect. 
E.  American Audio

®

 reserves the right to make changes in design and/or improvements upon 

its products without any obligation to include these changes in any products theretofore manu-
factured. 
F.  No warranty, whether expressed or implied, is given or made with respect to any acces-
sory supplied with products described above. Except to the extent prohibited by applicable 
law, all implied warranties made by American Audio

®

 in connection with this product, including 

warranties of merchantability or fitness, are limited in duration to the warranty period set forth 
above. And no warranties, whether expressed or implied, including warranties of merchant-
ability or fitness, shall apply to this product after said period has expired. The consumer’s and 
or Dealer’s sole remedy shall be such repair or replacement as is expressly provided above; 
and under no circumstances shall American Audio

®

 be liable for any loss or damage, direct or 

consequential, arising out of the use of, or inability to use, this product. 

 
G.    This  warranty  is  the  only  written  warranty  applicable  to  American  Audio

®

  Products  and 

supersedes all prior warranties and written descriptions of warranty terms and conditions here-
tofore published. 

   WARRANTY

©

American Audio

®

   -   www.AmericanAudio.us   -   MCD-510™ Instruction Manual Page 21

Summary of Contents for MCD-510

























Reviews: