background image

I. Read Instructions - All the safety and operating

instructions should be read before the appliance
is operated.

2. Save Instructions - The safety and operating

instructions should be saved for future 
reference.

3. Heed Warnings - All warnings on the appliance 

and in the operating instructions should be 
adhered to.

4. Follow Instructions - All operating and user 

instructions should be followed.

5. Water and Moisture - The appliance should not 

be used near water - for example, near a bath
tub, washbowl, kitchen sink, laundry tub, in a 
wet basement or near a swimming pool, etc.

6. Ventilation - The appliance should be situated 

so that its location or position does not interfere 
with its proper ventilation. For example, the 
appliance should not be situated on a bed, sofa,
rug, or similar surface that may block the 

ventilation openings; or, placed in a built-in 
installation, such as a bookcase or cabinet that 
may impede the flow of air through the 
ventilation openings.

7. Heat - The appliance should be situated away 

from heat sources such as radiators, heat 

registers, stoves, or other appliances (including 

amplifiers) that produce heat.

8. Power Sources - The appliance should be 

connected to a power supply only of the type 
described in the operating instructions or as 
marked on the appliance.

9. Grounding or Polarization - Precautions should 

be taken so that the grounding or polarization 

means of an appliance is not defeated.

10. Power-Cord Protection - Power-supply cords 

should be routed so that they are not likely 
to be walked on or pinched by items placed 
upon or against them, paying particular 
attention to cords at plugs, convenience 
receptacles, and the point where they exit      
from the appliance.

11. Cleaning - The appliance should be cleaned 

only as recommended by the manufacturer.

12. Non-use Periods - The power cord of the 

appliance should be unplugged from the outlet 
when left unused for a long period of time.

13. Object and Liquid Entry - Care should be taken

so that objects do not fall and liquids are not 
spilled into the enclosure through openings.

14. Damage Requiring Service - The appliance 

should be serviced by qualified service 
personnel when:

A.  The power-supply cord or the plug has 

been damaged.

B. Objects have fallen, or liquid has been  

spilled into the appliance.

C. The appliance has been exposed to rain 

or water.

D. The appliance does not appear to operate 

normally or exhibits a marked change in 
performance.

E.  The appliance has been dropped, or the 

enclosure damaged.

15. Servicing - The user should not attempt to 

service the appliance beyond that described in 
the operating instructions. All other servicing 
should be referred to qualified service 
personnel.

SAFETY INSTRUCTIONS

American DJ

®

AUDIO • DCD-PRO200™ INSTRUCTIONS MANUAL • PAGE 4

Summary of Contents for PROformer DCD-PR200 MK2














Reviews: