3.
TRACK BUTTON -
This buttons is
used to select a track. Tapping this button will
back skip on track, holding down this button will
rapidly BACK SKIP through the tracks.
4.
TRACK BUTTON -
This buttons is
used to select a track. Tapping this button will
forward skip to the next track, holding down
this button will rapidly forward skip through the
tracks.
5.
SGL/CTN -
This function allows you to choose
between single track play or continuous track
play (all tracks in order). This function also oper-
ates in PROGRAM and FLIP FLOP modes.
6. FX MIX -
This button activates the FX-MIX
mode This mode will automatically stop a play-
ing track or sample and restart from a selected
cue point.
7. FILTER/PHASE BUTTON
- This button is
used to activate and deactivate either the Filter
or Phase effect. See built-in effects on page 28.
8. ECHO/FLANGER EFFECT -
This button is
used to activate and deactivate either the ECHO
or FLANGER effect. See built-in effects on page
32.
9. FX SELECT BUTTON -
The effects are locat-
ed on two different layers. This button allows you
to select an effect on a different layer.
10. TIME MODE -
The TIME button will switch
the time value described in the
TIME METER
between TRACK ELAPSED PLAYING TIME, and
TRACK REMAINING TIME.
11. EJECT FUNCTION -
Pressing this will eject
the CD. The eject function will only when the unit
is in cue mode, this is to prevent accidentally
ejecting the disc when in play mode.
12. MEMORY BUTTON
- This button allows you
to program up to 3 cue points or three samples
in to the three
FLASH BUTTONS (31).
The sam-
ples or cue point can then be recalled at any
time even when the disk has been removed and
replaced at a later time.
13. PARAMETER TIME/FOLDER SEARCH
KNOB
- This knob is used to either adjust the
parameter time value or search through the fold-
ers on a Mp3 disc.
14. PARAMETER RATIO/TRACK SEARCH
KNOB
- This knob is used to either adjust the
parameter ratio value or search through the
tracks on a cd or Mp3 disc.
15. PARAMETER/FOLDER BUTTON -
Use this
button to switch between the Parameter func-
tions, or the Folders and Tracks on a Mp3 disc.
(1). Parameters - When the Parameter LED is lit,
you are able to adjust the time value and ratio
value, by turning their designated knobs.
(2). Folders - When the Folder LED is lit, you may
search through the music folders and tracks on a
Mp3 disc by turning their designated knobs.
16. SEARCH -
The search function has four for-
ward and four reverse speed positions allowing
you to quickly scan through tracks. The more
you turn the knob in either direction, the faster
your search.
17. VFD DISPLAY -
This high quality VFD display
indicates all the functions, as they are occurring.
This display is viewable at several comfortable
angles (see page 8). The display ICONS will be
explained in the section D.
18. SCRATCH/SKID BUTTON
- This button is
used to activate and deactivate either the Scratch
or Skid effect. See built-in effects on page 31.
19. HOLD BUTTON
- This button allows you to
set and lock any new parameters you set to the
effects. This button will glow bright blue when
the hold function is activated. If the hold function
is not selected any changes to the effect param-
eters will be momentary.
20. TRANS/PAN EFFECT -
This button is used
to activate and deactivate either the TRANS or
PAN effect. See built-in effects on page 33.
21. REV/PLAY -
This button activates reverse
play mode This function will play your track or
sample in reverse. All pitch and effect functions
will operate normally in this mode
22. CUE -
Pressing the
CUE
button during play-
back immediately pauses playback and returns
the track to the last set cue point (see setting a
GENERAL FUNCTIONS AND CONTROLS (Cont.)
©
American Audio
®
- www.AmericanAudio.us - Velocity Mp3™ Instruction Manual Page 10
