1. Overview
1.2 Rear Panel
AUDIO IN
LINE IN
0.1V~2VP-P
DMX IN
DMX OUT
Polarity Select
1=GROUND
2=DATA+
3=DATA-
1=GROUND
2=DATA-
3=DATA+
+
+
--
DC IN
+9V~+12V
500mA min.
DC INPUT
FOG MACHINE
CONTROL OUTPUT
PIN
CH
1
VCC
4
3
2
1
8
7
6
5
2
3
4
5
6
7
8
9
3
1
2
4
1
7
6
5
3
4
2
1. Audio Input
2. Control Output
3. DMX Polarity Select
4. DMX Output
5. DMX Input
6. Fog Machine Connector
7. DC Input
when the unit is mounted far away from the speaker.
9 pin extension cables.
Move to select Data polarity of DMX output.
the next DMX device.
This connector receives DMX signal.
Connects to the Fog Machine.
This input jack is used to plug in an external power
supply (9V-12V DC, 500 mA min.).
This connector sends the DMX signal through to
These 4 outputs connect to the Relay Pack using
when the internal Mic is not sensitive enough or
unit. This will provide a more accurate audio source
Connects an external audio source directly to the
5
