American DJ DMX OPERATOR, User Instructions

PLAYBACK SCENES & CHASES

MANUAL RUN SCENES:

1.  When power is first turned on, the unit is in manual scene mode.
2. Make sure

AUTO & MUSIC LED’S BUTTONS (FIGS. 8 AND 9)

are off .

3.  Select 

BANK (FIG.4), 

using the 

UP 

and 

DOWN BANK BUTTONS 

(FIG.4)

, that store the scenes you wish to run.

4.  Press the 

SCENE BUTTONS (FIG.2) 

to run the scene you selected. 

MANUAL RUN CHASES:

This function will allow you to manually step through all scenes in 
any Chase.

1. Press the 

PROGRAM BUTTON (FIG. 6)  

for three (3) seconds  to 

activate program mode.  The 

LCD DISPLAY (FIG.3)

will indicate 

program mode by displaying a continuous fast blinking dot next 
to

‘PROG.’

2. Execute a chase by selecting one of the eight

CHASE BUTTONS 

(FIG.5).

5. Press the 

TAP/SYNC BUTTON (FIG.11)

.

6. Use the 

BANK BUTTONS (FIG.4) 

to scroll through the chase.

Note:Display will show the number of the step in the Chase not

the Scene bank or number

AUTO RUN SCENES:

This function will run a bank of programmed scenes in a sequential
loop.

1. Press the 

AUTO/DEL (FIG.8)

to activate Auto Mode.  

A flashing 

light in the 

LCD DISPLAY (FIG.3) 

will indicate auto mode.

2.  Use the 

UP 

and

DOWN BANK BUTTONS (FIG.4)

, to select a bank of 

scenes to run.

3.  After selecting the bank of scenes you want run, you can use the 

SPEED (FIG.13)

and 

FADE (FIG.12)

sliders to adjust the scene chase

Note: you can change banks, to run different scene sequences,

at any time by pressing the 

UP 

and

DOWN BANK BUTTONS (FIG.4)

.

Note: when Adjusting fade time never make it slower than the

Speed setting or your scene will not be completed before a new step
is sent. 

American DJ Los Angeles, CA 90058 - 

DMX OPERATOR 

User Manual