2. Operation Guide
2. Operation Guide
2.1.2 Record Scenes
2.1.3 Delete a Program
2.1.4 Delete a Scene
1. Record enable.
3. Tap the Record button.
4. Tap the Up/Down button to select the scene
you wish to delete.
4. Tap the Del button, all LEDs flash briefly
indicating this scene is deleted.
7
8
4. Tap the Record button to record scenes.
Create a desired scene on your DMX controller.
Once the scene is satisfactory, tap the Record/
Mode button to record this scene as the first
step, all LEDs flash briefly indicating you've
record this scene into the program and the
Segment Display shows the current step.
5. Continue recording scenes until you've got a
desired program. You may record a maximum
of 48 scenes into a program.
6. Tap the Black-out button until the Record LED
goes out, this unit is out of Record mode.
p 3 0 0
1. Record enable
2. Repeat steps 2-3 in Record Scenes to select
the program you wish to delete.
2. Repeat steps 2-3 in Record Scenes to select
the program that holds the scene you wish to
delete.
3. Tap the Del button to delete the program, all
LEDs flash briefly indicating this operation.
NOTE: You must record scenes before you can delete the scenes.
2
3
Summary of Contents for DMX-SOLO
Page 2: ......
