Thank you for purchasing LED-T-FC by American DJ®. This foot controller is used in conjunction with
the LED Touch. It has color and chase control, along with blackout. Please read the user instructions
before using your new LED-T-FC.
FEATURES AND FUNCTIONS:
1. BLACKOUT BUTTON - Press this button to activate Blackout mode. Hold this button for 3
seconds to enter and exit LED-T-FC control mode.
2. BLACKOUT DIRECT LED - This LED indicates the current blackout mode.
LED ON - Blackout mode is active.
LED BLINKING - This lets you know that the lights are controlled by the LED Touch.
LED OFF - Blackout mode is deactivated and lights are controlled by the LED-T-FC.
3. 5-PIN XLR CONNECTION - Used to connect to the LED Touch.
4. COLOR LED - When this LED is lit, Color mode is currently active. Use the UP or DOWN
buttons to choose one of 12 colors.
5. CHASE LED - When this LED is lit, Chase mode is currently active. Use the UP or DOWN
buttons to choose a programmed chase.
6. SPEED LED - When this LED is lit, the Hold Time/Fade Time of your chose chase can be
adjusted. For example, if you want to set the Hold Time to 4 seconds, press the hold time
button, and then press it again after 4 seconds.
7. DOWN/HOLD TIME - Use to choose a color, chase, or adjust the Hold Time.
8. UP/FADE TIME - Use to choose a color, chase, or adjust the Fade Time.
9. FULL ON - For all lights, each channel value will be 255 when you hold this button.
10. MODE - Press this button to switch between Color Mode, Chase Mode, and Speed Adjust
Mode.
LED-T-FC
