Caution!
No user serviceable parts inside do not attempt repairs. In the event your LED-T-FC
should fail, contact
AmericanDJ®
.
Customer Support:
American DJ
®
provides a toll free customer support line, to provide set up help and to
answer any question should you encounter problems during your set up or initial operation. You may also visit
us on the web at www.americandj.com for any comments or suggestions. Service Hours are Monday through
Friday 9:00 a.m. to 4:30 p.m. Pacific Standard Time.
Voice: (800) 322-6337 Fax: (323) 582-2941 E-mail: support@americandj.com
The LED-T-FC carries a 2 year (730 days) limited warranty. Please fill out the enclosed warranty card to
validate your purchase. All returned service items whether under warranty or not, must be freight pre-
paid and accompany a return authorization (R.A.) number. If the remote is under warranty you must
provide a copy of your proof of purchase invoice. Please contact American DJ® customer support for
a R.A. number.
Operation:
1. Connect the LED Touch to the lighting fixtures you want to control.
2. Connect the LED-T-FC to the LED Touch.
3. Power on the fixtures and LED Touch.
4. Press the Blackout button (1) for 3 seconds, the blackout LED (2) should turn off. The fix-
ture button LEDs on the LED Touch will light up, and the LED-T-FC is now controlling the
fixtures.
5. Press the Blackout button (1) to blackout the fixtures, press the button again to quit black-
out. After you have done this one of the Mode LEDs (4-6) should be lit.
6. Press the Mode button (10) to switch between Color mode, Chase mode, and Speed adjust
mode. The corresponding Mode LEDs (4-6) will indicate what mode you are in. Modes are
described below:
COLOR MODE: Press the Up (8) or Down (7) buttons to scroll through and find your
desired color. There are 12 colors to choose from.
CHASE MODE: Press the Up (8) or Down (7) buttons to scroll through and find your
desired programmed chase.
SPEED ADJUST: In this mode you can set the Hold Time/Fade Time of your desired
chase.
Example: If you want the Fade Time to be 5 seconds, press the Fade Time button (8)
once, and then press the button again after 5 seconds has passed. Do the same thing
when setting the Hold Time.
7. To exit LED-T-FC control and give control back to the LED Touch, press the Blackout button
(1) for 3 seconds on LED-T-FC, or simply press the Blackout button on the LED Touch.
