FUNCTIONS AND CONTROLS
1
12
11
9
8
7
6
5a
4
3
2
14
20
19
18
17
16
15
13
10
21
27
26
28
29
25
24
23
22
33
34
35
36
37
38
32
31
30
PRO DJ 2
Control Layout
1.
Direct Track Access Buttons (1-10) - These buttons are used to select a starting track. They are also used in
Memory (2) and Recall (3) modes for cue points.
2.
Memory - This button is used to program up to 10 cue points per a CD in to the Direct Track Access
Buttons (1-10) Press the Memory (2) button during play or pause, the memory LED lights up. Use the frame
search to reach the desired cue point, then press a Direct Track Access Buttons (1-10) to memorize that
starting point. Repeat the preceding steps to memorize all 10 starting points, if desired.
3.
RECALL - This button allow you to cue up any of the 10 memory points that have been memorized. Press
RECALL button then any of the 10 number buttons. the player will cue up the selected point if in Pause Mode.
The player will continue to play music if it is the Play Mode.
4.
OPEN/CLOSE - (Disc Tray Open/Close)- Press to load or eject the disc. Each press will open or close the disc
tray on the transport. NOTE: Tray will not open unless the disc has been paused.
5a.
IN BUTTON - (CUE “ON THE FLY”) This allows you to set a CUE POINT without stopping the play back. This
button also sets the beginning of a seamless loop.
5b.
OUT BUTTON - Used to set the ending point when looping. When the OUT BUTTON is pressed, the player
will play the loop continuously. To exit the loop, press the OUT BUTTON again.
6.
SHUTTLE WHEEL - (OUTER RING) This wheel has 6 forward and 6 reverse speed positions for searching
through songs. The more you turn the wheel in either direction the faster you search through the music.
American DJ
®
AUDIO • PRO-DJ2 INSTRUCTIONS MANUAL • PAGE 4
5b
Figure 1
