American DJ Supply
4295 Charter Street
Los Angeles Ca. 90058
(323) 582-2650
(323) 582-2610
www.americandj.com
American DJ
®
User Instructions
Rampage
Introduction:
Thank you for purchasing the Rampage™ DMX controller from
American DJ
®
. To optimize the performance of this product,
please read these operating instructions carefully to familiarize
yourself with the basic operations of this unit. The American DJ
®
Rampage™ is a unique intelligent moon flower. This unit can be
controlled by a standard DMX controller or can be linked together
with several unit to form a synchronized light show. The Rampage
comes with 16 gobos plus a spot, several of the gobos have multi-
color combinations. This unit has been tested at the factory before
being shipped to you, there is no assembly required.
Customer Support:
American DJ provides a toll free customer support line, to provide
set up help and to answer any question should you encounter
problems during your set up or initial operation. You may also visit
us on the web at www.americandj.com for any comments or sug-
gestions.
Service Hours are Monday through Friday 10:00 a.m. to 5:00 p.m.
Pacific Time.
Voice:
(800) 322-6337
Fax:
(323) 582-2610
E-mail:
support@americandj.com
Warning!
To prevent or reduce the risk of electrical shock or fire, do not
expose this unit to rain or moisture. Clearing memory often may
cause damage to the memory chip, be careful not to re initialize
your unit frequency often to avoid this risk. Only use the recom-
mended AC/DC power adaptor.
Caution!
There are no user serviceable parts inside this unit. Do not
attempt any repairs yourself, doing so will void your manufac-
tures warranty. In the unlikely event your unit may require service,
please contact your nearest American DJ dealer.
©American DJ Supply® www.americandj.com Rampage Instruction Manual Page 2
