Front Panel - Controls and Functions (Cont.)
In 1x16 mode, each button can be programmed to control a group of
channels, this makes each button a Flash Scene.
The Bump Buttons are also used in programming mode, when program-
ming Flash Scenes and Master Scenes.
11. Scene Y:
These 8 sliders are used to control the intensities of channel 9-16 (11). The
overall intensity of channel faders 9-16 (11) is controlled by the X Cross-
fader (5).
12. Built-in Patterns 9-12:
These four Patterns buttons are used to activate any of the four built in
programs stored in the unit’s memory. A pattern LED will glow when a
corresponding pattern was selected for operation.
13. Tap Sync:
This button is used to create a chase rate. Repeatedly tapping this button
will establish a chase rate that corresponds to your tap rate. The chase rate
will be synchronized to the time interval of the last two taps. A Tap Sync
LED will flash at the established chase rate. A chase rate may be set at
anytime, weather a chase pattern is running or not.
The Tap Sync Button also activates Step Mode. Holding the Tap Sync
button down for at least five seconds will activate Step Mode. To deactivate
Step Mode hold down the Tap Sync button for five seconds.
14. Full On Button:
This button is used to bring all channel output (1-16) to full intensity. This
function will override the Blackout (15) function. A Full On LED (14) will
glow when Full On (14) is active.
15. Blackout Button:
This button is used to disable all channel output (1-16). Only the Full On
(14) and Bump Buttons (10) function can override this function. Blackout
is active when the Blackout LED is glowing.
©
American DJ Supply
®
- www.americandj.com - Stage Setter 8™ Instruction Manual Page 11
Stage Setter 8™ Controls and Functions
Front Panel - Controls and Functions (Cont.)
16. Fog Machine Button:
This button is used to control fog output to compatible American DJ fog
machine. These fog machine include the Master Blaster 700 and 1000,
Vaporizer, and the Dyno Fog. This button not only eliminates the need of
a separate fog machine controller, but also allows quick and easy access to a
fog machine output. For an updated list of compatible fog machines please
contact our support department.
17. Patterns 1-8:
These buttons are used to access any of the eight patterns you may create
yourself. A pattern LED will glow when a corresponding pattern was
selected for operation.
Stage Setter 8™ Controls and Functions
©
American DJ Supply
®
- www.americandj.com - Stage Setter 8™ Instruction Manual Page 12
