American DJ WIFLY BAR QA5, User Instructions

ADJ Products, LLC  -  www.adj.com  - WiFLY Bar QA5 User Manual Page 29

ADJ Products, LLC  -  www.adj.com  - WiFLY Bar QA5 User Manual Page 30

  WiFLY Bar QA5                                  Battery Replacement

1. Uscrew the four thumbscrews 

that hold the battery door in 

place.

2. Remove the battery door to 

access the battery.

3. Carefully pull out the battery 

connector cables.

4. Carefully remove the battery 

from the compartment.

5. Carefully disconnect the bat-

tery cables.

6. Once the cables have been 

disconnected you can now con-

nect your new battery. Put every-

thing back together in reverse 

order.

  WiFLY Bar QA5                                       Trouble Shooting

Listed below are a few common problems the user may encounter, 

with solutions.
Unit not responding to DMX:

1.  Check that the DMX cables are connected properly and are    

  wired correctly (pin 3 is “hot”; on some other DMX devices    

  pin 2 may be ‘hot’). Also, check that all cables are connected   

  to the right connectors; it does matter which way the inputs    

  and outputs are connected.
Unit does not respond to sound:

1.  Quiet or high pitched sounds will not activate the unit.

2.  Make sure that Sound Active mode is activated.

  WiFLY Bar QA5                                                    Cleaning

Due to fog residue, smoke, and dust cleaning the internal and exter-

nal optical lenses must be carried out periodically to optimize light 

output.  

1.   Use normal glass cleaner and a soft cloth to wipe down the 

  outside casing.

2.   Clean the external optics with glass cleaner and a soft cloth 

  every 20 days.

3.  Always be sure to dry all parts completely before plugging 

  the unit back in.

Cleaning frequency depends on the environment in which the fixture 

operates (i.e. smoke, fog residue, dust, dew). 

Disconnect the unit from its power source. Remove the power cord 

from the unit. Once the cord has been removed, you will find that the 

fuse holder is located inside the power socket. Insert a flat-head screw 

driver into the power socket and gently pry out the fuse holder. Remove 

the bad fuse and replace with a new one. The fuse holder also has a 

holder for a spare fuse.

  WiFLY Bar QA5                                     Fuse Replacement