22
American Dryer Corp.
113335 - 12
Dual Timer Dryer Models
Select drying time and cool down time desired.
Turn heat timer clockwise to desired time (i.e., 1 minute to
60 minutes).
Turn cool down timer clockwise to desired time (i.e., 0 minutes
to 15 minutes).
Select drying temperature.
Push “Start” button and the dryer will now start.
To stop dryer, open the main door.
Service/Parts Information ____________
Service
Service must be performed by a qualified trained technician,
service agency, or gas supplier. If service is required, contact
the reseller from whom the ADC equipment was purchased.
If the reseller cannot be contacted or is unknown, contact
the ADC Service Department for a reseller in your area.
NOTE: When contacting the ADC Service Department, be
sure to give them the correct model number and serial
number so that your inquiry is handled in an expeditious
manner.
Parts
Replacement parts should be purchased from the reseller
from whom the ADC equipment was purchased. If the reseller
cannot be contacted or is unknown, contact the ADC Parts
Department for a reseller in your area. Parts may also be
purchased directly from the factory by calling the ADC Parts
Department at +1 (508) 678-9000 or you may FAX in your
order at +1 (508) 678-9447.
NOTE: When ordering replacement parts from the ADC
reseller or the ADC factory be sure to give them the correct
model number and serial number so that your parts order
can be processed in an expeditious manner.
Warranty Information _________________
Returning Warranty Cards
Before any dryer leaves the ADC factory test area, a warranty
card is placed on the back side of the main door glass. These
warranty cards are intended to serve the customer where we
record the individual installation date and warranty information
to better serve you should you file a warranty claim.
If a warranty card did not come with your dryer, contact the
ADC Warranty Department or ADC Service Department at
+1 (508) 678-9000.
IMPORTANT: A separate warranty card must be completed
and returned for each individual dryer.
NOTE: Be sure to include the installation date when
returning the warranty card(s).
Warranty
For a copy of the ADC commercial warranty covering your
particular dryer(s), contact the ADC reseller from whom you
purchased the equipment and request a dryer warranty form.
If the reseller cannot be contacted or is unknown, warranty
information can be obtained from the factory by contacting
the ADC Warranty Department at +1 (508) 678-9000.
NOTE: Whenever contacting the ADC factory for warranty
information, be sure to have the dryer’s model number and
serial number available so that your inquiry can be
handled in an expeditious manner.
Returning Warranty Parts
All dryer or parts warranty claims or inquiries should be
addressed to the ADC Warranty Parts Department. To
expedite processing, the following procedures must be
followed:
No parts are to be returned to ADC without prior written
authorization (R.M.A.) from the factory.
NOTE: An R.M.A. is valid for only 30 days from date of
issue.
The R.M.A. issued by the factory, as well as any other
correspondence pertaining to the returned part(s), must be
included inside the package with the failed merchandise.
Each part must be tagged with the following information:
Model number and serial number of the dryer from which
part was removed.
Nature of failure (be specific).
Date of dryer installation.
Date of part failure.
Specify whether the part(s) being returned is for a
replacement, a credit, or a refund.
NOTE: If a part is marked for a credit or a refund, the
invoice number covering the purchase of the replacement
part must be provided.
Warranty tags (ADC Part No. 450064) are available at “no
charge” from ADC upon request.
The company returning the part(s) must clearly note the
complete company name and address on the outside of the
package.
All returns must be properly packaged to ensure that they
are not damaged in transit. Damage claims are the
responsibility of the shipper.
IMPORTANT: No replacements, credits, or refunds will be
issued for merchandise damaged in transit.
All returns should be shipped to the ADC factory in such a
manner that they are insured and a proof of delivery can be
obtained by the sender.
