background image

37

INTRODUCTION

ENGLISH

PREPARATION

RECORDING

OPERATION

PLAYBACK

OPERATION

NOTICE

1

Turn the power ON for the monitor TV.

PLAYBACK

2

Insert a tape which has been recorded on.

3

Press the PLAY button.

4

Select the playback time mode.

Tracking Adjustment

Use the 

 TRACKING button to adjust when noise appears on the playback screen.

1

2

3

P

LAYBACK OPERATION

H

PLAY

SP

Notes:

When restart record is selected, and a power failure occurs, the VTR will automatically go into record mode when power is
restored.

When the PAUSE button is pressed during playback, the VTR will go into still mode. To return to playback, press the PAUSE or
PLAY button. If the VTR is in still mode for longer 10 minutes the VTR will automatically resume normal playback.

Reverse playback is released after 1 minute and the VTR returns to normal playback.

The time mode cannot be changed during reverse playback (only in A3-hour and A18-hour mode).

When playing back a tape that has been recorded in the A12, A18, A24, 48, 72, 120, 168, 240, 480, 720 and 960 hour modes,
pay attention to the following points.
• The picture may be somewhat horizontally unstable however, this is not a malfunction of the VTR.
• The upper section of the picture on the monitor screen may be distorted. This is not an abnormality.

When playing back tapes recorded in various time modes, the picture may be slightly unstable depending on the time mode.

Press either 

 or 

 TRACKING button so that a

clearer picture is obtained.

When returning the tracking to a standard adjustment
value, press 

 and 

 buttons simultaneously.

TIMER

ON

/

STANDBY

EJECT

VIDEO MODE

TAPE REMAIN

TIME LAPSE VIDEO

4Head 960Hour

DISPLAY

PLAY

TIME MODE

SET

SHIFT

TRACKING

LOCATION SELECT

COUNTER

ALARM

RESET

MEMORY

AUTO

B/W

REMOTE

OFF REMOTE OPTION

BUZZER

ON       OFF

REC

REC CHECK

+

P

PICTURE

SOFT

SHARP

TRACKING

TIME MODE

SET

+

PLAY

STOP

The picture may be vertically unstable during playback in the A12, A18, A24, 48, 72, 120, 168, 240, 480, 720 and 960 hour
modes. This is not an abnormality.

When returning to normal playback after picture search, the picture may wobble for a short while.

Recording time mode

A3, A12, A24, 48, 72, 120, 168, 240, 480, 720, 960, L01,
L02, L03 hour

A18 hours

Playback Time mode

A3, A12, A24, 48, 72, 120, 168, 240, 480,
720, 960 hour

A6, A18 hours

Summary of Contents for ADR8045X





















































Reviews: