8
Quick Setup Guide
10. Enter the remaining items on the Modem menu as needed to configure DigiMux to
communicate with your modem. For more information, see your modem’s
documentation.
11. Press
ESC
until the Exit menu is displayed, then select
Save and Exit
.
PC Setup
1. On your Windows PC, use the Network Connection Wizard to "Accept incoming
connections (Let other computers connect to mine by phone line)". Enter the
DigiMux's "Dial Out User Name and Password" correctly, as specified in the
DigiMux OSD (On Screen Display).
2. On your Windows PC, use the Network Connection Wizard to create a "Dial-up to
the Internet (Connect to the Internet using my phone line)". You must enter the
DigiMux's phone number, Dial-in user name, and password. Be sure to indicate
that the IP address is to be assigned by the DigiMux, if "Auto assign Remote IP"
in DigiMux is set to
ON
.
3. Use the Dial-up to establish a connection with DigiMux through the phone line,
then access DigiMux using DigiClient. See
NOTE: Visit www.AmericanDynamics.net/DigiMux for information on
DigiMux and compatible third-party devices.
