176
Intellex
®
Digital Video Management System Installation and Operating Instructions
Archive Operation
MORE>>>
7.
When the tape is full, the unit displays the following screen:
a.
After the unit ejects the tape, label it as indicated on this
screen.
b.
Insert a new tape.
c.
After the tape drive lights stop blinking, click
Next
. The
unit checks the new tape and continues the backup.
Recovering from an
Interruption
Archive operations can be interrupted by any of the following:
•
A power failure.
•
An error during an archive operation.
•
Turning off system power without following the shutdown
procedure (see
•
Pressing the
Reset
button on the front panel.
•
Pressing the
Eject
button on the tape drive.
•
Rebooting the unit after a system error.
When this happens, the archive information on the tape is not
complete and must be recovered. Otherwise, the data cannot be
restored.
If the tape is still in the tape drive, the unit displays a message
and recovers the tape data automatically. Then it continues the
archive operation.