manualshive.com logo in svg

American Dynamics Intellex DV16000, Installation And Operating Instructions Manual

Get the most out of your American Dynamics Intellex DV16000 with our comprehensive Application Note. This user manual is available for free download from our website - your ultimate resource for product manuals. Discover every feature, navigate with ease, and maximize your surveillance system's potential. Download now!

Share
Download
background image

Intellex

®

 Digital Video Management System Installation and Operating Instructions

3

License Information

MORE>>>

LICENSE

INFORMATION

WARNING:to Reduce Risk of electric shock, do not remove cover. no user
serviceable parts inside. refer servicing to qualified service personnel.

DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

DO NOT INSTALL THIS PRODUCT IN HAZARDOUS AREAS WHERE HIGHLY
COMBUSTIBLE OR EXPLOSIVE PRODUCTS ARE STORED OR USED.

The lightning flash/arrowhead symbol, within an equilateral triangle, alerts the
user to the presence of a shock hazard within the product’s enclosure.

CAUTION:Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type recommended by the battery
manufacturer. Dispose of used batteries according to the battery manufacturer’s
instructions.

WARNING: This equipment has been tested and found to comply with the limits
for a Class “A” digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause interference to radio
communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the
interference at their own expense.

Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.

NOTE: This product was FCC verified under test conditions that included the use
of shielded I/O cables and connectors between system components. To be in
compliance with FCC regulations, the user must use shielded cables and
connectors for all except power and alarm cables.
This digital apparatus does not exceed the Class A limits for radio noise emissions
as set out in the Radio Interference Regulations (ICES-003) of the Canadian
Department of Communications.

Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant
les limites applicables de la Classe A prescrites dans le Réglement (ICES-003)
sur le brouillage radioélectrique édicté par le Ministère des Communications du
Canada.

READ THIS LICENSE AGREEMENT BEFORE OPENING THE DISK
PACKAGE, INSTALLING THE SOFTWARE, OR USING YOUR SYSTEM.

THIS LICENSE AGREEMENT DEFINES YOUR RIGHTS AND OBLIGATIONS.
BY BREAKING THE SEAL ON THIS PACKAGE, INSTALLING THE
SOFTWARE, OR USING YOUR SYSTEM, YOU AGREE TO ALL OF THE
TERMS AND CONDITIONS OF THIS AGREEMENT. IF YOU DO NOT AGREE
TO ALL OF THE TERMS AND CONDITIONS OF THIS AGREEMENT, YOU MAY,
WITHIN 30 DAYS, RETURN THIS PACKAGE, ALL THE DOCUMENTATION,
AND ALL ACCOMPANYING MATERIAL(S) TO THE POINT OF PURCHASE
FOR A REFUND.

SOFTWARE LICENSE

The Software includes the computer software, the associated media, any printed
material, and any electronic documentation and may be provided to you installed
on a hard drive (the media) as part of a system. The Software is licensed, not
sold.

GRANT OF LICENSE

This agreement between Sensormatic and you permits you to use the Software
you purchased. Once you have purchased the number of copies you require, you
may use the Software and accompanying material provided you use no more than
the licensed number of copies at one time. The Software is only licensed for use

Summary of Contents for Intellex DV16000










































































































































































































Reviews:

No comments

Related manuals for Intellex DV16000

GE INT-22.5R1-24 Operating Instruction preview
INT-22.5R1-24
Brand: GE Pages: 7
Samsung MX-F870 Service Manual preview
MX-F870
Brand: Samsung Pages: 70
Samsung MM-L7 Manual Del Usuario preview
MM-L7
Brand: Samsung Pages: 21
Samsung MM-ZB9 Service Manual preview
MM-ZB9
Brand: Samsung Pages: 28
EVE 10ECA4101 Getting Started preview
10ECA4101
Brand: EVE Pages: 43
WIA UTILITY UTAC13-0 Owner'S Manual preview
UTILITY UTAC13-0
Brand: WIA Pages: 8
Zipato sme.NCM629GB Quick Installation Manual preview
sme.NCM629GB
Brand: Zipato Pages: 2
C Systems WLD4800 User Manual preview
WLD4800
Brand: C Systems Pages: 4
Migatronic AUTOMIG 200 XE Operating Manual preview
AUTOMIG 200 XE
Brand: Migatronic Pages: 28
R&TTE LRX 2035 Quick Start Manual preview
LRX 2035
Brand: R&TTE Pages: 6
Omnitronic 208AP User Manual preview
208AP
Brand: Omnitronic Pages: 28
JBL VTX A8 Series Rigging Manual preview
VTX A8 Series
Brand: JBL Pages: 65
XNET IGC2050F Install Manual preview
IGC2050F
Brand: XNET Pages: 17
Nxg NX-C5.2-X Owner'S Manual preview
NX-C5.2-X
Brand: Nxg Pages: 2
Moore Industries HLPRG Quick Start Manual preview
HLPRG
Brand: Moore Industries Pages: 46
Intellisystem IT150 Quick Installation Manual preview
IT150
Brand: Intellisystem Pages: 7
Abus FUBW50120 Installation Instructions And User Manual preview
FUBW50120
Brand: Abus Pages: 181
Lorex SHS-4QM2 Instruction Manual preview
SHS-4QM2
Brand: Lorex Pages: 23

Brands by name

Popular brands

Load more brands