SPEEDDOME ULTRA VII CAMERA DOME CONFIGURATION UTILITY
8200-0184-09, REV. A
OPERATOR’S MANUAL SUPPLEMENT
10 of 13
5. Use the joystick to move the highlight to
Presets
. Press
Set
to select. The
Select
Preset to Program
screen displays.
SELECT PRESET TO PROGRAM
PRESET
NUMBER
PRESET NAME
1-96
PRESET 1-96
FOCUS FAR to program preset
EXIT
6. Use the joystick to select the Preset you want
to program. If the Preset has been
programmed the dome automatically moves to
that position.
Move the joystick right to increase the
preset number.
Move the joystick left to decrease the
preset number.
When the correct Preset number appears,
press
Set
to begin programming.
7. The
Presets
screen displays. Use the joystick
to adjust the dome to the correct pan/tilt
position.
PRESETS
PRESET X
Position camera with PAN
TILT, ZOOM and IRIS
FOCUS FAR to save and exit
EXIT
IMPORTANT!
If using the WV-CU550A
Controller with the WJ-SX550 Multiplexer, you
must press
F3
(A. Res) to adjust the zoom,
focus, or iris settings. This places the controller
in normal navigating mode. Make the
necessary adjustments. When finished, press
F1
(On) to resume menu mode.
8. Press
Set
to save the Preset information.
9. To program more Presets, repeat steps 5
through 8. To exit the
Dome Configuration
Menu
and save changes, press
F4
(Exit).
To verify the Preset programming, enter a Preset
number (1-64) and press Preset.
Specifications-Indoor Dome
Operational
Pan/Tilt:
Manual Pan Speed......................... 0.2°-100° per second
(scaled to zoom position)
Manual Tilt Speed ........................ 0.25°-100° per second
(scaled to zoom position)
Preset Pan/Tilt Speed ............220° per second maximum
Pan Travel..................................360° continuous rotation
Tilt Travel ..................................................................>90°
Pan/Tilt Accuracy .....................................................±0.5°
22X Camera Zoom Functions:
Optical Zoom..............................................................22X
Digital Zoom ...............................................................11X
Zoom Pause......................................... 22X selectable or
33X
default
Total Zoom ...............................................................242X
Maximum Zoom Stop .......44X, 66X, 88X (default), 110X,
132X, 154X, 176X, 198X, 220X, 242X
Zoom/Focus Accuracy ........................................... ±0.5%
23x Day/Night
Camera Zoom Functions:
Optical Zoom..............................................................23X
Digital Zoom ...............................................................10X
Zoom Pause......................................... 23X selectable or
35X
default
Total Zoom ...............................................................230X
Maximum Zoom Stop .......46X, 69X, 92X (default), 115X,
138X, 161X, 184X, 207X, 230X
Zoom/Focus Accuracy ........................................... ±0.5%
Auto Synchronization:
Line Locked.........................Remote V-phase adjustment
Internal ..........................................Built-in sync generator
Address Range ....................................................... 1-255
Number of Presets:
VM16 / ADTT16 ........................... 96 with SensorNet 485
VM32 / AD32................................ 96 with SensorNet 485
AD2150 ............................................. 64 with Manchester
16 with RS422 (using AD2083-02A)
VM96......................Virtual with RS422 or SensorNet 485
VM168 / AD168................................ 64 with Manchester,
RS-422 or SensorNet
16 with RS422 (using AD2083-02A)
AD2050 ............................................. 64 with Manchester
16 with RS422 (using AD2083-02A)
